#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# Copied from device/google/shusky/ to resolve build failure of husky_car

# Restrict the visibility of Android.bp files to improve build analysis time
$(call inherit-product-if-exists, vendor/google/products/sources_pixel.mk)

ifdef RELEASE_GOOGLE_HUSKY_RADIO_DIR
RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_HUSKY_RADIO_DIR)
endif
ifdef RELEASE_GOOGLE_HUSKY_RADIOCFG_DIR
RELEASE_GOOGLE_PRODUCT_RADIOCFG_DIR := $(RELEASE_GOOGLE_HUSKY_RADIOCFG_DIR)
endif
RELEASE_GOOGLE_BOOTLOADER_HUSKY_DIR ?= pdk# Keep this for pdk TODO: b/327119000
RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_HUSKY_DIR)
$(call soong_config_set,shusky_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_HUSKY_DIR))


TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_HUSKY_VERSION)
# Keeps flexibility for kasan and ufs builds
TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_HUSKY_DIR)
TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_HUSKY_DIR)/kernel-headers

LOCAL_PATH := device/google/shusky

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
    USE_UWBFIELDTESTQM := true
endif
ifeq ($(filter factory_husky, $(TARGET_PRODUCT)),)
    include device/google/shusky/uwb/uwb_calibration.mk
endif

ifneq ($(TARGET_BOOTS_16K),true)
PRODUCT_16K_DEVELOPER_OPTION := $(RELEASE_GOOGLE_HUSKY_16K_DEVELOPER_OPTION)
endif

$(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-husky.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/husky/device-vendor-husky.mk)
$(call inherit-product-if-exists, vendor/google_devices/husky/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/WallpapersHusky.mk)

# display
DEVICE_PACKAGE_OVERLAYS += device/google/shusky/husky/overlay
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

PRODUCT_COPY_FILES += \
	device/google/shusky/husky/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
    device/google/shusky/husky/display_golden_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_google-hk3_cal0.pb \
    device/google/shusky/display_golden_external_display_cal2.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_external_display_cal2.pb

CAMERA_PRODUCT ?= husky

ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL_ZUMA),true)
USE_AUDIO_HAL_AIDL := true
endif

include device/google/shusky/camera/camera.mk
include device/google/shusky/audio/husky/audio-tables.mk
include device/google/zuma/device-shipping-common.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/touch/stm/predump_stm20.mk
include device/google/gs-common/touch/gti/predump_gti.mk

# Init files
PRODUCT_COPY_FILES += \
	device/google/shusky/conf/init.husky.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.husky.rc

# Recovery files
PRODUCT_COPY_FILES += \
        device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.husky.rc

# MIPI Coex Configs
PRODUCT_COPY_FILES += \
        device/google/shusky/husky/radio/husky_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv \
        device/google/shusky/husky/radio/husky_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
        device/google/shusky/husky/radio/husky_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \
        device/google/shusky/husky/radio/husky_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv

# NFC
PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

PRODUCT_PACKAGES += \
	$(RELEASE_PACKAGE_NFC_STACK) \
	Tag \
	android.hardware.nfc-service.st

# SecureElement
PRODUCT_PACKAGES += \
	android.hardware.secure_element-service.thales

PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/shusky/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf

# Bluetooth HAL
PRODUCT_COPY_FILES += \
	device/google/shusky/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
    ro.bluetooth.a2dp_offload.supported=true \
    persist.bluetooth.a2dp_offload.disabled=false \
    persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

# Enable Bluetooth AutoOn feature
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.server.automatic_turn_on=true

# Bluetooth Tx power caps
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv \
    $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_GC3VE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GC3VE_EU.csv

# POF
PRODUCT_PRODUCT_PROPERTIES += \
    ro.bluetooth.finder.supported=true

ifeq ($(USE_AUDIO_HAL_AIDL),true)
# AIDL

else
# HIDL

# Spatial Audio
PRODUCT_PACKAGES += \
	libspatialaudio

# Sound Dose
PRODUCT_PACKAGES += \
	android.hardware.audio.sounddose-vendor-impl \
	audio_sounddose_aoc

endif

# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.spatializer_enabled=true

# HdMic Audio
PRODUCT_SOONG_NAMESPACES += device/google/shusky/audio/husky/prebuilt/libspeechenhancer
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.app.audio.gsenet.version=1
PRODUCT_PACKAGES += \
    libspeechenhancer

# Audio CCA property
PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=false

# DCK properties based on target
PRODUCT_PROPERTY_OVERRIDES += \
    ro.gms.dck.eligible_wcc=3 \
    ro.gms.dck.se_capability=1

# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_DEBUG += \
    hci_inject

# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.opus.enabled=true

# Bluetooth SAR test tool
PRODUCT_PACKAGES_DEBUG += \
    sar_test

# Bluetooth EWP test tool
PRODUCT_PACKAGES_DEBUG += \
    ewp_tool

# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.a2dp_aac.vbr_supported=true

# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.bqr.event_mask=295262 \
    persist.bluetooth.bqr.vnd_quality_mask=29 \
    persist.bluetooth.bqr.vnd_trace_mask=0 \
    persist.bluetooth.vendor.btsnoop=true
else
PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.bqr.event_mask=295262 \
    persist.bluetooth.bqr.vnd_quality_mask=16 \
    persist.bluetooth.bqr.vnd_trace_mask=0 \
    persist.bluetooth.vendor.btsnoop=false
endif

# Spatial Audio
PRODUCT_PACKAGES += \
	libspatialaudio \
	librondo

# Bluetooth Super Wide Band
PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.hfp.swb.supported=true

# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_switcher.supported?=true \
	bluetooth.profile.bap.unicast.client.enabled?=true \
	bluetooth.profile.csip.set_coordinator.enabled?=true \
	bluetooth.profile.hap.client.enabled?=true \
	bluetooth.profile.mcp.server.enabled?=true \
	bluetooth.profile.ccp.server.enabled?=true \
	bluetooth.profile.vcp.controller.enabled?=true

# Bluetooth LE Audio Broadcast
PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.profile.bap.broadcast.assist.enabled?=true \
	bluetooth.profile.bap.broadcast.source.enabled?=true

# Bluetooth LE Audio enable hardware offloading
PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_offload.supported=true \
	persist.bluetooth.leaudio_offload.disabled=false

# Bluetooth LE Auido offload capabilities setting
PRODUCT_COPY_FILES += \
	device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

# LE Audio Unicast Allowlist
PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5,SM-R630,G2,AG2,WH-1000XM6

# Bluetooth LE Audio CIS handover to SCO
# Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.notify.idle.during.call=true

# Support LE Audio dual mic SWB call
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.leaudio.dual_bidirection_swb.supported=true

# Disable Bluetooth HAP by default
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.profile.hap.enabled_by_default=false

# Support LE & Classic concurrent encryption (b/330704060)
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.ble.allow_enc_with_bredr=true

# Support One-Handed mode
PRODUCT_PRODUCT_PROPERTIES += \
    ro.support_one_handed_mode=true

# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software


# Gatekeeper
# PRODUCT_PACKAGES += \
# 	android.hardware.gatekeeper@1.0-service.software

# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# 	android.hardware.security.keymint-service

# Keymaster
#PRODUCT_PACKAGES += \
#	android.hardware.keymaster@4.0-impl \
#	android.hardware.keymaster@4.0-service

#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

# PRODUCT_PROPERTY_OVERRIDES += \
# 	ro.hardware.keystore_desede=true \
# 	ro.hardware.keystore=software \
# 	ro.hardware.gatekeeper=software

# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
    device/google/shusky/powerstats/husky \

# WiFi Overlay
PRODUCT_PACKAGES += \
	UwbOverlayHK3 \
	UwbOverlayHK3Gsi \
	WifiOverlay2023 \
	PixelWifiOverlay2023

# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts

# UWB
PRODUCT_SOONG_NAMESPACES += \
    device/google/shusky/uwb

# Location
# SDK build system
include device/google/gs-common/gps/brcm/device.mk

PRODUCT_COPY_FILES += \
       device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer

# Location
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
    PRODUCT_COPY_FILES += \
        device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
        device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
        device/google/shusky/location/gps.6.1.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
    PRODUCT_COPY_FILES += \
        device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
        device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
        device/google/shusky/location/gps_user.6.1.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif

# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=50p \
	persist.device_config.configuration.disable_rescue_party=true

# Fingerprint HAL
GOODIX_CONFIG_BUILD_VERSION := g7_trusty
APEX_FPS_TA_DIR := //vendor/google_devices/shusky/prebuilts
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk)
ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk)
else
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk)
endif

PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.udfps.als_feed_forward_supported=true \
    persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

# Fingerprint exposure compensation
PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.udfps.auto_exposure_compensation_supported=true

# Camera Vendor property
PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.camera.front_720P_always_binning=true

# Media Performance Class 14
PRODUCT_PRODUCT_PROPERTIES += ro.odm.build.media_performance_class=34

# config of display brightness dimming
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage?=1
PRODUCT_VENDOR_PROPERTIES += \
    vendor.primarydisplay.op.hs_hz=120 \
    vendor.primarydisplay.op.ns_hz=60 \
    vendor.primarydisplay.op.ns_min_dbv=1172

# kernel idle timer for display driver
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true

# lhbm peak brightness delay: decided by kernel
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=0

# Display LBE
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

# blocking zone for min idle refresh rate
PRODUCT_VENDOR_PROPERTIES += \
    ro.vendor.primarydisplay.blocking_zone.min_refresh_rate_by_nits=15:10,:1

# Display ACL
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=0

# display color data
PRODUCT_COPY_FILES += \
	device/google/shusky/husky/panel_config_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-hk3_cal0.pb

# Vibrator HAL
$(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION))_fw7_2_91)
ACTUATOR_MODEL := luxshare_ict_081545
ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.vibrator.hal.chirp.enabled=0 \
    ro.vendor.vibrator.hal.device.mass=0.222 \
    ro.vendor.vibrator.hal.loc.coeff=2.8 \
    persist.vendor.vibrator.hal.context.enable=false \
    persist.vendor.vibrator.hal.context.scale=60 \
    persist.vendor.vibrator.hal.context.fade=true \
    persist.vendor.vibrator.hal.context.cooldowntime=1600 \
    persist.vendor.vibrator.hal.context.settlingtime=5000

# Override Output Distortion Gain
PRODUCT_VENDOR_PROPERTIES += \
    vendor.audio.hapticgenerator.distortion.output.gain=0.38

# Increment the SVN for any official public releases
ifdef RELEASE_SVN_HUSKY
TARGET_SVN ?= $(RELEASE_SVN_HUSKY)
else
# Set this for older releases that don't use build flag
TARGET_SVN ?= 38
endif

PRODUCT_VENDOR_PROPERTIES += \
    ro.vendor.build.svn=$(TARGET_SVN)

# Set device family property for SMR
PRODUCT_PROPERTY_OVERRIDES += \
    ro.build.device_family=HK3SB3AK3

# Set build properties for SMR builds
ifeq ($(RELEASE_IS_SMR), true)
    ifneq (,$(RELEASE_BASE_OS_HUSKY))
        PRODUCT_BASE_OS := $(RELEASE_BASE_OS_HUSKY)
    endif
endif

# Set build properties for EMR builds
ifeq ($(RELEASE_IS_EMR), true)
    ifneq (,$(RELEASE_BASE_OS_HUSKY))
        PRODUCT_PROPERTY_OVERRIDES += \
        ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_HUSKY)
    endif
endif
# WLC userdebug specific
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
    PRODUCT_COPY_FILES += \
        device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
endif

# Setup Wizard device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
    setupwizard.feature.enable_quick_start_flow=true \

# Quick Start device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
    ro.quick_start.oem_id=00e0 \
    ro.quick_start.device_id=husky

# PKVM Memory Reclaim
PRODUCT_VENDOR_PROPERTIES += \
    hypervisor.memory_reclaim.supported=1

# P23 Devices no longer need rlsservice
PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.camera.rls_supported=false

# Settings Overlay
PRODUCT_PACKAGES += \
    SettingsHuskyOverlay

# Display RRS default Config
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1008x2244@120
# TODO: b/250788756 - the property will be phased out after HWC loads user-preferred mode
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.preferred_mode=1008x2244@120

# Window Extensions
$(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)

# To resolve build failure, comment out this
# Disable Settings large-screen optimization enabled by Window Extensions
#PRODUCT_PRODUCT_PROPERTIES += \
#    persist.settings.large_screen_opt.enabled=false

# Keyboard height ratio and bottom padding in dp for portrait mode
PRODUCT_PRODUCT_PROPERTIES += \
         ro.com.google.ime.kb_pad_port_b=10.4

PRODUCT_PRODUCT_PROPERTIES ?= \
    ro.com.google.ime.height_ratio=1.0

# Enable camera exif model/make reporting
PRODUCT_VENDOR_PROPERTIES += \
    persist.vendor.camera.exif_reveal_make_model=true

# Enable DeviceAsWebcam support
PRODUCT_VENDOR_PROPERTIES += \
    ro.usb.uvc.enabled=true

PRODUCT_PACKAGES += \
	NfcOverlayHusky \

# Set support hide display cutout feature
PRODUCT_PRODUCT_PROPERTIES += \
    ro.support_hide_display_cutout=true

PRODUCT_PACKAGES += \
    NoCutoutOverlay \
    AvoidAppsInCutoutOverlay

# ETM
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
endif

PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO := true

ifneq ($(wildcard vendor/arm/mali/valhall),)
PRODUCT_CHECK_PREBUILT_MAX_PAGE_SIZE := true
endif

# Bluetooth device id
# Husky: 0x410D
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.device_id.product_id=16653

# Set support for LEA multicodec
PRODUCT_PRODUCT_PROPERTIES += \
    bluetooth.core.le_audio.codec_extension_aidl.enabled=true

# LE Audio configuration scenarios
PRODUCT_COPY_FILES += \
    device/google/shusky/bluetooth/audio_set_scenarios.json:$(TARGET_COPY_OUT_VENDOR)/etc/aidl/le_audio/aidl_audio_set_scenarios.json

PRODUCT_COPY_FILES += \
    device/google/shusky/bluetooth/audio_set_configurations.json:$(TARGET_COPY_OUT_VENDOR)/etc/aidl/le_audio/aidl_audio_set_configurations.json

# Enable APF by default
PRODUCT_VENDOR_PROPERTIES += \
    vendor.powerhal.apf_disabled=false \
    vendor.powerhal.apf_enabled=true

# PDK does not use build flags
ifeq ($(USE_GOOGLE_CARRIER_SETTINGS), true)
    $(call soong_config_set,carrier_settings,gs_common_paris_assets_path,paris_data_y25q2/latest/pixel2023)
endif

PRODUCT_SOONG_ONLY := $(RELEASE_SOONG_ONLY_HUSKY)