## SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/haswell
	register "ec_present" = "true"
	register "spd_addresses" = "{0x50, 0, 0x52, 0}"

	chip cpu/intel/haswell
		device cpu_cluster 0 on ops haswell_cpu_bus_ops end
	end

	device domain 0x0 on
		ops haswell_pci_domain_ops

		device pci 00.0 on end # Host bridge
		device pci 02.0 on # Internal graphics VGA controller
			register "gfx" = "GMA_STATIC_DISPLAYS(0)"
			register "gpu_ddi_e_connected" = "0"
			register "gpu_dp_b_hotplug" = "4"
			register "gpu_dp_c_hotplug" = "4"
			register "gpu_dp_d_hotplug" = "4"
			register "panel_cfg" = "{
				.up_delay_ms		= 200,
				.down_delay_ms		=  50,
				.cycle_delay_ms		= 500,
				.backlight_on_delay_ms	=   1,
				.backlight_off_delay_ms	=   1,
				.backlight_pwm_hz	= 200,
			}"
		end
		device pci 03.0 on end # Mini-HD audio

		chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point LP PCH
			register "docking_supported" = "true"
			register "alt_gp_smi_en" = "0x00002000"
			register "gpe0_en_1" = "0x00000100"
			register "gpe0_en_2" = "0x00000080"
			register "gpe0_en_4" = "0x00000042"

			device pci 13.0 off end # Smart Sound Audio DSP
			device pci 14.0 on  end # xHCI Controller
			device pci 15.0 off end # Serial I/O DMA
			device pci 15.1 off end # I2C0
			device pci 15.2 off end # I2C1
			device pci 15.3 off end # GSPI0
			device pci 15.4 off end # GSPI1
			device pci 15.5 off end # UART0
			device pci 15.6 off end # UART1
			device pci 16.0 on  end # Management Engine Interface 1
			device pci 16.1 off end # Management Engine Interface 2
			device pci 16.2 off end # Management Engine IDE-R
			device pci 16.3 off end # Management Engine KT
			device pci 17.0 off end # SDIO
			device pci 19.0 on  end # Intel Gigabit Ethernet
			device pci 1b.0 on  end # High Definition Audio
			device pci 1c.0 off end # PCIe Port #1
			device pci 1c.1 off end # PCIe Port #2
			device pci 1c.2 off end # PCIe Port #3
			device pci 1c.3 off end # PCIe Port #4
			device pci 1c.4 off end # PCIe Port #5
			device pci 1c.5 off end # PCIe Port #6
			device pci 1d.0 on  end # USB2 EHCI #1
			device pci 1f.0 on      # LPC bridge
				register "gen1_dec" = "0x007c0681"
				register "gen2_dec" = "0x005c0921"
				register "gen3_dec" = "0x003c07e1"
				# Enable 0x910 and 0x911 for early init and EC driver
				register "gen4_dec" = "0x007c0901"

				chip ec/dell/mec5035
					device pnp ff.0 on end
                                end
			end
			device pci 1f.2 on  end # SATA Controller (AHCI)
			device pci 1f.3 on  end # SMBus
			device pci 1f.6 off end # Thermal
		end
	end
end