chip soc/intel/tigerlake

	# Power limits/thermals - adjust according to your needs, but beware of VRM cooling!
	# H_6_CORE means Core i5, H_8_CORE means Core i7 or i9. Stock PL1/PL2: 45/109W.
	register "power_limits_config[POWER_LIMITS_H_6_CORE]" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 109,
	}"

	register "power_limits_config[POWER_LIMITS_H_8_CORE]" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 109,
	}"
	register "tcc_offset" = "8"

	# FSP configuration
	register "eist_enable" = "1"
	register "enable_c6dram" = "1"

	register "deep_s3_enable_ac" = "true"
	register "deep_s3_enable_dc" = "true"
	register "deep_s5_enable_ac" = "true"
	register "deep_s5_enable_dc" = "true"

	# PME routing
	register "pmc_gpe0_dw0" = "PMC_GPP_R"
	register "pmc_gpe0_dw1" = "PMC_GPP_B"
	register "pmc_gpe0_dw2" = "PMC_GPP_D"

	# FiVR External Rails
	register "ext_fivr_settings" = "{
		.configure_ext_fivr = 1,
		.v1p05_enable_bitmap = 0,
		.vnn_enable_bitmap = 0,
		.v1p05_supported_voltage_bitmap = 0,
		.vnn_supported_voltage_bitmap = 0,
		.v1p05_icc_max_ma = 500,
		.vnn_sx_voltage_mv = 1050,
        }"

	device cpu_cluster 0 on end
	device domain 0 on
		device ref igpu on
			register "DdiPortBConfig" = "DDI_PORT_CFG_NO_LFP" # DP
			register "DdiPortBHpd" = "1"
			register "DdiPortBDdc" = "1"

			register "DdiPortCHpd" = "1" # HDMI
			register "DdiPortCDdc" = "1"

			register "DdiPort1Hpd" = "1" # HDMI
			register "DdiPort1Ddc" = "1"
		end

		device ref peg0 on	# SoC M.2 (Gen4)
			register "PcieClkSrcUsage[2]" = "0x40"
			register "PcieClkSrcClkReq[2]" = "PCIE_CLK_NOTUSED"
		end

		device ref peg1 on 	# SoC x16 (Gen4)
			register "PcieClkSrcUsage[0]" = "0x41"
			register "PcieClkSrcClkReq[0]" = "PCIE_CLK_NOTUSED"
		end

		device ref north_xhci on
			 register "TcssXhciEn" = "1"
		end

		device ref south_xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC_SKIP),		/* Rear, bottom right */
				[1] = USB2_PORT_MID(OC_SKIP),		/* Rear, bottom left */
				[2] = USB2_PORT_MID(OC_SKIP),		/* NIC left */
				[3] = USB2_PORT_MID(OC_SKIP),		/* NIC right */
				[4] = USB2_PORT_MID(OC_SKIP),		/* Front Panel 1 */
				[5] = USB2_PORT_MID(OC_SKIP),		/* Front Panel 2 */
				[8] = USB2_PORT_MID(OC_SKIP),		/* Front Panel 1 (USB3) */
				[9] = USB2_PORT_MID(OC_SKIP),		/* Front Panel 2 (USB3) */
				[10] = USB2_PORT_MID(OC_SKIP),		/* Rear, top left */
				[11] = USB2_PORT_MID(OC_SKIP),		/* Rear, top right */
			}"

			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC_SKIP),	/* Rear, bottom right */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* Rear, bottom left */
				[2] = USB3_PORT_DEFAULT(OC_SKIP),	/* Front Panel 1 */
				[3] = USB3_PORT_DEFAULT(OC_SKIP),	/* Front Panel 2 */
				[4] = USB3_PORT_DEFAULT(OC_SKIP),	/* Rear, top left */
				[5] = USB3_PORT_DEFAULT(OC_SKIP),	/* Rear, top right */
			}"
		end

		device ref shared_ram on end

		device ref sata on
			register "SataPortsEnable" = "{
				[0] = 1,
				[1] = 1,
				[2] = 1,
				[3] = 1,
			}"
			register "SataPortsDevSlp" = "{
				[0] = 1,
				[1] = 1,
				[2] = 1,
				[3] = 1,
			}"
			register "SataSalpSupport" = "1"
		end

		device ref pcie_rp5 on		# PCH M.2 (Gen3)
			register "PcieRpSlotImplemented[4]" = "true"
			register "PcieClkSrcUsage[4]" = "4"
			register "PcieClkSrcClkReq[4]" = "PCIE_CLK_NOTUSED"
		end

		device ref pcie_rp9 on		# PCH NGFF (WiFi)
			register "PcieRpSlotImplemented[8]" = "true"
			register "PcieClkSrcUsage[5]" = "8"
			register "PcieClkSrcClkReq[5]" = "PCIE_CLK_NOTUSED"

		end

		device ref pcie_rp11 on		# RTL8111 GbE
			register "PcieClkSrcUsage[3]" = "10"
			register "PcieClkSrcClkReq[3]" = "PCIE_CLK_NOTUSED"
		end

		device ref pcie_rp12 on		# PCH x1 (Gen3)
			register "PcieRpSlotImplemented[11]" = "true"
			register "PcieClkSrcUsage[1]" = "11"
			register "PcieClkSrcClkReq[1]" = "PCIE_CLK_NOTUSED"
		end

		device ref pch_espi on
			chip superio/ite/it8613e
				device pnp 2e.0 off end
				device pnp 2e.1 on      # COM 1
					io 0x60 = 0x3f8
					irq 0x70 = 4
					irq 0xf0 = 1
				end

				device pnp 2e.4 on 	# Environment Controller
					io 0x60 = 0xa30
					io 0x62 = 0xa20
					irq 0x70 = 0x00
					irq 0xf4 = 0xe0
					irq 0xf5 = 0x00
					irq 0xf6 = 0xf0

					register "TMPIN1.mode"    = "THERMAL_DIODE"
					register "TMPIN2.mode"    = "THERMAL_DIODE"

					register "FAN2.mode" = "FAN_SMART_AUTOMATIC" # CPU_FAN
					register "FAN3.mode" = "FAN_SMART_AUTOMATIC" # SYS_FAN

					register "FAN2.smart.tmpin"     = "1"
					register "FAN2.smart.tmp_off"   = "35"
					register "FAN2.smart.tmp_start" = "42"
					register "FAN2.smart.tmp_full"  = "72"
					register "FAN2.smart.tmp_delta" = "2"
					register "FAN2.smart.pwm_start" = "26"
					register "FAN2.smart.slope"     = "24"

					register "FAN3.smart.tmpin"     = "1"
					register "FAN3.smart.tmp_off"   = "35"
					register "FAN3.smart.tmp_start" = "42"
					register "FAN3.smart.tmp_full"  = "72"
					register "FAN3.smart.tmp_delta" = "2"
					register "FAN3.smart.pwm_start" = "26"
					register "FAN3.smart.slope"     = "24"
				end

				device pnp 2e.5 off end
				device pnp 2e.6 off end

				device pnp 2e.7 on	# GPIO
					irq 0x2d = 0x02
					io 0x60  = 0xa10
					io 0x62  = 0xa00
					irq 0x70 = 0x00
					irq 0x71 = 0x01
					irq 0xbc = 0xc0
					irq 0xbd = 0x03
					irq 0xc1 = 0x02
					irq 0xc8 = 0x00
					irq 0xc9 = 0x02
					irq 0xda = 0xb0
					irq 0xdb = 0x44
				end
				device pnp 2e.a off end # CIR
			end
		end
		device ref p2sb hidden end
		device ref hda on
			subsystemid 0x10ec 0x3000
			register "PchHdaAudioLinkHdaEnable" = "1"
		end
		device ref smbus on end
	end
        chip drivers/crb
                device mmio 0xfed40000 on end
        end
end