fw_config
	field WIFI 2 2
		option WIFI_CNVI_7		0
	end
	field AUDIO 3 5
		option AUDIO_UNKNOWN		0
		option AUDIO_ALC721_SNDW	1
	end
end

chip soc/intel/pantherlake

	# The initial version temporarily uses the PTL-H,
	# but the thermal design is based on the PTL-U.
	# Apply PTL-U's thermal settings here to avoid thermal issues.
	register "power_limits_config[PTL_H_1_CORE]" = "{
		.tdp_pl1_override = 15,
		.tdp_pl2_override = 55,
		.tdp_pl4 = 152,
	}"

	register "power_limits_config[PTL_H_2_CORE]" = "{
		.tdp_pl1_override = 15,
		.tdp_pl2_override = 55,
		.tdp_pl4 = 152,
	}"

	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)"	# USB2_C0
	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)"	# USB2_C1
	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# USB_CAMERA
	register "usb2_ports[4]" = "USB2_PORT_MID(OC0)"		# Type-A Port A0
	register "usb2_ports[5]" = "USB2_PORT_MID(OC1)"		# Type-A Port A1

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2 Type-A Port A0
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # USB3.2 Type-A Port A1

	register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)" # USB3_C0
	register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC_SKIP)" # USB3_C1

	register "tcss_cap_policy[0]" = "TCSS_TYPE_C_PORT_FULL_FUN"
	register "tcss_cap_policy[2]" = "TCSS_TYPE_C_PORT_FULL_FUN"
	register "tcss_cap_policy[3]" = "TCSS_TYPE_C_PORT_FULL_FUN"

	# Enable EDP in PortA
	register "ddi_port_A_config" = "1"
	register "ddi_ports_config" = "{
                [DDI_PORT_A] = DDI_ENABLE_HPD,
	}"

	# Enable CNVi Wi-Fi and Bluetooth
	register "cnvi_wifi_core" = "true"
	register "cnvi_bt_core" = "true"

	register "serial_io_i2c_mode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
	}"

	register "serial_io_gspi_mode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoPci,
		[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI0A] = PchSerialIoDisabled,
	}"

	# Intel Common SoC Config
	#+-------------------+---------------------------+
	#| Field             |  Value                    |
	#+-------------------+---------------------------+
	#| I2C3              | TPM(cr50)                 |
	#| I2C4              | Touchpad                  |
	#| I2C5              | Touchscreen               |
	#+-------------------+---------------------------+
	register "common_soc_config" = "{
		/* Render OEM footer logo 100px above from the edge */
		.logo_bottom_margin = 100,
		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
		.i2c[3] = {
			.early_init = 1,
			.speed = I2C_SPEED_FAST,
		},
		.i2c[4] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[5] = {
			.speed = I2C_SPEED_FAST,
		},
	}"

	device domain 0 on
		device ref igpu on
			chip drivers/gfx/generic
				register "device_count" = "4"
				# DDIA for eDP
				register "device[0].name" = ""LCD0""
				register "device[0].type" = "panel"
				# HDMI
				# If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB
				register "device[1].name" = ""DD01""
				# TCP0 (DP-1) for port C0
				register "device[2].name" = ""DD02""
				register "device[2].use_pld" = "true"
				register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
				# TCP2 (DP-2) for port C1
				register "device[3].name" = ""DD03""
				register "device[3].use_pld" = "true"
				register "device[3].pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
				device generic 0 on end
			end
		end

		device ref iaa off end
		device ref tbt_pcie_rp0 on end
		device ref tbt_pcie_rp2 on end
		device ref tbt_pcie_rp3 on end
		device ref tcss_xhci on
			chip drivers/usb/acpi
				device ref tcss_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C0""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref tcss_usb3_port0 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device ref tcss_usb3_port2 on end
					end
				end
			end
		end

		device ref tcss_dma0 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port0 as dfp[0].typec_port
				device generic 0 on end
			end
		end
		device ref tcss_dma1 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port2 as dfp[0].typec_port
				device generic 0 on end
			end
		end

		device ref ish on
			chip drivers/intel/ish
				register "add_acpi_dma_property" = "true"
				device generic 0 on end
			end
		end

		device ref xhci on
			chip drivers/usb/acpi
				device ref xhci_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C0""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref usb2_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device ref usb2_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Camera""
						register "type" = "UPC_TYPE_INTERNAL"
						register "has_power_resource" = "true"
						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C06)"
						device ref usb2_port3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 0""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(3, 1)"
						device ref usb2_port5 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(4, 1)"
						device ref usb2_port6 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 0""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(3, 2)"
						device ref usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 1""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(4, 2)"
						device ref usb3_port2 on end
					end
				end
			end
		end

		device ref pcie_rp9 on
			register "pcie_rp[PCIE_RP(9)]" = "{
			.clk_src = 1,
			.clk_req = 1,
			.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "is_storage" = "true"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B16)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E03)"
				register "srcclk_pin" = "1"
				device generic 0 on end
			end
		end # Gen5 M.2 SSD
		device ref cnvi_wifi on
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				register "add_acpi_dma_property" = "true"
				register "enable_cnvi_ddr_rfim" = "true"
				use cnvi_bluetooth as bluetooth_companion
				device generic 0 on end
			end
		end # CNVi

		device ref cnvi_bluetooth on end

		# NOTE: i2c0 is function 0; hence it needs to be enabled when any of i2c1-5 is enabled.
		# TPM device is under i2c3. Therefore, i2c0 needs to be enabled anyways.
		device ref i2c0 on end
		device ref i2c3 on
			chip drivers/i2c/tpm
				register "hid" = ""GOOG0005""
				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E02_IRQ)"
				device i2c 50 on end
			end
		end # I2C3
		device ref i2c4 on
			chip drivers/i2c/hid
				register "generic.hid" = ""PIXA2305""
				register "generic.desc" = ""PIXA Touchpad""
				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E18_IRQ)"
				# NOTE: pmc_gpe0_dw2 is GPP_E in baseboard devicetree.cb.
				register "generic.wake" = "GPE0_DW2_18"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x20"
				device i2c 68 on end
			end
			chip drivers/i2c/hid
				register "generic.hid" = ""PNP0C50""
				register "generic.desc" = ""Synaptics Touchpad""
				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E18_IRQ)"
				register "generic.wake" = "GPE0_DW2_18"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x20"
				device i2c 2c on end
			end
		end # I2C4
		device ref i2c5 on
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN9004""
				register "generic.desc" = ""ELAN Touchscreen""
				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F18_IRQ)"
				register "generic.detect" = "1"
				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F16)"
				register "generic.reset_delay_ms" = "150"
				register "generic.reset_off_delay_ms" = "1"
				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F08)"
				register "generic.enable_delay_ms" = "6"
				register "generic.enable_off_delay_ms" = "30"
				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E05)"
				register "generic.stop_off_delay_ms" = "1"
				register "generic.has_power_resource" = "1"
				register "generic.use_gpio_for_status" = "true"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 0x10 on end
			end
		end # I2C5
		device ref gspi0 on
			chip drivers/spi/acpi
				register "name" = ""CRFP""
				register "hid" = "ACPI_DT_NAMESPACE_HID"
				register "uid" = "1"
				register "compat_string" = ""google,cros-ec-spi""
				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E22_IRQ)"
				register "wake" = "GPE0_DW2_22"
				register "has_power_resource" = "true"
				register "use_gpio_for_status" = "true"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C15)"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E19)"
				register "enable_delay_ms" = "3"
				device spi 0 on end
			end
		end

		device ref smbus on end
		device ref hda on
			probe AUDIO AUDIO_ALC721_SNDW
			chip drivers/intel/soundwire
				device generic 0 on
					chip drivers/soundwire/alc711
						register "desc" = ""Headset Codec""
						register "alc711_address.version" = "SOUNDWIRE_VERSION_1_2"
						register "alc711_address.class" = "MIPI_CLASS_SDCA"
						register "alc711_address.part_id" = "MIPI_DEV_ID_REALTEK_ALC721"
						# SoundWire Link 3 ID 1
						device generic 3.1 on
							probe AUDIO AUDIO_ALC721_SNDW
						end
					end
				end
			end
		end
	end
end