chip soc/intel/elkhartlake

	device cpu_cluster 0 on end

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "pmc_gpe0_dw0" = "GPP_B"
	register "pmc_gpe0_dw1" = "GPP_F"
	register "pmc_gpe0_dw2" = "GPP_E"

	# FSP configuration
	register "SaGv" = "SaGv_Enabled"
	register "Heci2Enable" = "1"

	# Display related UPDs
	# Enable HPD for DDI ports C
	register "DdiPortCHpd" = "1"

	# Enable DDC for DDI ports C
	register "DdiPortCDdc" = "1"

	# USB related UPDs
	register "usb2_ports[0]" = "USB2_PORT_MID(OC3)"	# USB3/2 Type A port1
	register "usb2_ports[1]" = "USB2_PORT_MID(OC3)"	# USB2 WWAN
	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 Bluetooth
	register "usb2_ports[3]" = "USB2_PORT_MID(OC3)"	# Type-C Port1
	register "usb2_ports[4]" = "USB2_PORT_MID(OC3)"	# Type-C Port2
	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# Type-C Port3
	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# Type-C Port4
	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# USB3/2 Type A port2
	register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 Type A port1
	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 Type A port2

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)"	# USB3/2 Type A port1
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)"	# USB3/2 Type A port2
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"	# USB3 WLAN
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"	# UNUSED

	# Skip the CPU replacement check
	register "SkipCpuReplacementCheck" = "1"

	# PCIe root ports related UPDs
	register "PcieClkSrcUsage[0]" = "0x00"
	register "PcieClkSrcUsage[1]" = "0x06"
	register "PcieClkSrcUsage[2]" = "0x04"
	register "PcieClkSrcUsage[3]" = "0xFF"
	register "PcieClkSrcUsage[4]" = "0xFF"
	register "PcieClkSrcUsage[5]" = "0xFF"

	register "PcieClkSrcClkReq[0]" = "0x0"
	register "PcieClkSrcClkReq[1]" = "0x1"
	register "PcieClkSrcClkReq[2]" = "0x2"
	register "PcieClkSrcClkReq[3]" = "0x3"
	register "PcieClkSrcClkReq[4]" = "0x4"
	register "PcieClkSrcClkReq[5]" = "0x5"

	# Storage (SATA/SDCARD/EMMC) related UPDs
	register "SataSalpSupport" = "1"
	register "SataPortsEnable[0]" = "1"
	register "SataPortsEnable[1]" = "1"
	register "SataPortsDevSlp[0]" = "0"
	register "SataPortsDevSlp[1]" = "1"

	register "ScsEmmcHs400Enabled" = "1"
	register "ScsEmmcDdr50Enabled" = "1"
	register "SdCardPowerEnableActiveHigh" = "1"

	# LPSS Serial IO (I2C/UART/GSPI) related UPDs
	register "SerialIoI2cMode" = "{
		[PchSerialIoIndexI2C0] = PchSerialIoPci,
		[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C2] = PchSerialIoPci,
		[PchSerialIoIndexI2C3] = PchSerialIoPci,
		[PchSerialIoIndexI2C4] = PchSerialIoPci,
		[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C6] = PchSerialIoPci,
		[PchSerialIoIndexI2C7] = PchSerialIoPci,
	}"

	register "SerialIoI2cPadsTermination" = "{
		[PchSerialIoIndexI2C0] = 1,
		[PchSerialIoIndexI2C1] = 1,
		[PchSerialIoIndexI2C2] = 1,
		[PchSerialIoIndexI2C3] = 1,
		[PchSerialIoIndexI2C4] = 1,
		[PchSerialIoIndexI2C5] = 1,
		[PchSerialIoIndexI2C6] = 1,
		[PchSerialIoIndexI2C7] = 1,
	}"

	register "SerialIoGSpiMode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI1] = PchSerialIoHidden,
		[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
	}"

	register "SerialIoGSpiCsEnable" = "{
		[PchSerialIoIndexGSPI0] = 1,
		[PchSerialIoIndexGSPI1] = 1,
		[PchSerialIoIndexGSPI2] = 1,
	}"

	register "SerialIoGSpiCsMode" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
		[PchSerialIoIndexGSPI2] = 0,
	}"

	register "SerialIoGSpiCsState" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
		[PchSerialIoIndexGSPI2] = 0,
	}"

	register "SerialIoUartMode" = "{
		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoSkipInit,
	}"

	register "SerialIoUartDmaEnable" = "{
		[PchSerialIoIndexUART0] = 1,
		[PchSerialIoIndexUART1] = 1,
		[PchSerialIoIndexUART2] = 1,
	}"

	register "fivr" = "{
		.fivr_config_en = true,
		.v1p05_state = FIVR_ENABLE_ALL_SX,
		.vnn_state = FIVR_ENABLE_ALL_SX,
		.vnn_sx_state = FIVR_ENABLE_S3_S4_S5,
		.v1p05_rail = FIVR_VOLTAGE_NORMAL,
		.vnn_rail = FIVR_ENABLE_ALL_VOLTAGE,
		.v1p05_icc_max_ma = 200,
		.vnn_sx_mv = 1050,
		.vcc_low_high_us = 12,
		.vcc_ret_high_us = 54,
		.vcc_ret_low_us = 43,
		.vcc_off_high_us = 150,
		.spread_spectrum = 15,
	}"

	# TSN GBE related UPDs
	register "PchTsnGbeLinkSpeed" = "Tsn_1_Gbps"
	register "PchTsnGbeSgmiiEnable" = "1"
	register "PchTsnGbeMultiVcEnable"    =  "1"
	register "PseTsnGbeMultiVcEnable[0]" =  "1"
	register "PseTsnGbeMultiVcEnable[1]" =  "1"

	# GPIO for SD card detect
	register "sdcard_cd_gpio" = "GPP_G5"

	device domain 0 on
		device pci 00.0 on	end # Host Bridge
		device pci 02.0 on	end # Integrated Graphics Device
		device pci 04.0 off	end # SA Thermal device
		device pci 08.0 off	end # GNA
		device pci 09.0 off	end # CPU Intel Trace Hub

		device pci 10.0 on	end # I2C6
		device pci 10.1 on	end # I2C7
		device pci 10.5 on	end # Integrated Error Handler

		device pci 11.0 off	end # Intel PSE UART0
		device pci 11.1 off	end # Intel PSE UART1
		device pci 11.2 off	end # Intel PSE UART2
		device pci 11.3 off	end # Intel PSE UART3
		device pci 11.4 off	end # Intel PSE UART4
		device pci 11.5 off	end # Intel PSE UART5
		device pci 11.6 off	end # Intel PSE IS20
		device pci 11.7 off	end # Intel PSE IS21

		device pci 12.0 on	end # GSPI2
		device pci 12.3 on	end # Management Engine UMA Access
		device pci 12.4 on	end # Management Engine PTT DMA Controller
		device pci 12.5 off	end # UFS0
		device pci 12.7 off	end # UFS1

		device pci 13.0 off	end # Intel PSE GSPI0
		device pci 13.1 off	end # Intel PSE GSPI1
		device pci 13.2 off	end # Intel PSE GSPI2
		device pci 13.3 off	end # Intel PSE GSPI3
		device pci 13.4 off	end # Intel PSE GPIO0
		device pci 13.5 off	end # Intel PSE GPIO1

		device pci 14.0 on	end # USB3.1 xHCI
		device pci 14.1 off	end # USB3.1 xDCI (OTG)

		device pci 15.0 on	end # I2C0
		device pci 15.1 on	end # I2C1
		device pci 15.2 on	end # I2C2
		device pci 15.3 on	end # I2C3

		device pci 16.0 on	end # Management Engine Interface 1
		device pci 16.1 on	end # Management Engine Interface 2
		device pci 16.4 on	end # Management Engine Interface 3
		device pci 16.5 on	end # Management Engine Interface 4

		device pci 17.0 on	end # SATA

		device pci 18.0 off	end # Intel PSE I2C7
		device pci 18.1 off	end # Intel PSE CAN0
		device pci 18.2 off	end # Intel PSE CAN1
		device pci 18.3 off	end # Intel PSE QEP0
		device pci 18.4 off	end # Intel PSE QEP1
		device pci 18.5 off	end # Intel PSE QEP2
		device pci 18.6 off	end # Intel PSE QEP3

		device pci 19.0 on	end # I2C4
		device pci 19.1 on	end # I2C5
		device pci 19.2 on	end # UART2

		device pci 1a.0 on	end # eMMC
		device pci 1a.1 off	end # SD
		device pci 1a.3 off	end # Intel Safety Island

		device pci 1b.0 off	end # Intel PSE I2C0
		device pci 1b.1 off	end # Intel PSE I2C1
		device pci 1b.2 off	end # Intel PSE I2C2
		device pci 1b.3 off	end # Intel PSE I2C3
		device pci 1b.4 off	end # Intel PSE I2C4
		device pci 1b.5 off	end # Intel PSE I2C5
		device pci 1b.6 off	end # Intel PSE I2C6

		device pci 1c.0 on	end # RP1 (pcie0 single VC)
		device pci 1c.1 on	end # RP2 (pcie0 single VC)
		device pci 1c.2 on	end # RP3 (pcie0 single VC)
		device pci 1c.3 on	end # RP4 (pcie0 single VC)
		device pci 1c.4 on	end # RP5 (pcie1 multi VC)
		device pci 1c.5 on	end # RP6 (pcie2 multi VC)
		device pci 1c.6 on	end # RP7 (pcie3 multi VC)

		device pci 1d.0 off	end # Intel PSE IPC (local host to PSE)
		device pci 1d.1 on	end # Intel PSE Time-Sensitive Networking GbE 0
		device pci 1d.2 on	end # Intel PSE Time-Sensitive Networking GbE 1
		device pci 1d.3 off	end # Intel PSE DMA0
		device pci 1d.4 off	end # Intel PSE DMA1
		device pci 1d.5 off	end # Intel PSE DMA2
		device pci 1d.6 off	end # Intel PSE PWM
		device pci 1d.7 off	end # Intel PSE ADC

		device pci 1e.0 on	end # UART0
		device pci 1e.1 on	end # UART1
		device pci 1e.2 on	end # GSPI0
		device pci 1e.3 on	end # GSPI1
		device pci 1e.4 on	end # PCH Time-Sensitive Networking GbE
		device pci 1e.6 on	end # HPET
		device pci 1e.7 on	end # IOAPIC

		device pci 1f.0 on	end # eSPI Interface
		device pci 1f.1 on	end # P2SB
		device pci 1f.2 hidden	end # Power Management Controller
		device pci 1f.3 off	end # Intel cAVS/HDA
		device pci 1f.4 on	end # SMBus
		device pci 1f.5 on	end # PCH SPI (flash & TPM)
		device pci 1f.7 off	end # PCH Intel Trace Hub
	end
end