fw_config
	field AUDIO 0 3
		option AUDIO_NONE			0
		option AUDIO_MAX98373_ALC5682_SNDW	1
		option AUDIO_ALC722_SNDW		2
		option AUDIO_ALC256_HDA			3
		option AUDIO_MAX98360_ALC5682I_I2S	4
		option AUDIO_ALC721_SNDW		5
	end
	field WIFI 4 5
		option WIFI_CNVI_6		0
		option WIFI_CNVI_7		1
		option WIFI_PCIE_6		2
		option WIFI_PCIE_7		3
	end
	field CELLULAR 6 7
		option CELLULAR_ABSENT		0
		option CELLULAR_USB		1
		option CELLULAR_PCIE		2
	end
	field TOUCHSCREEN 8 10
		option TOUCHSCREEN_NONE		0
		option TOUCHSCREEN_LPSS_I2C	1
		option TOUCHSCREEN_GSPI		2
		option TOUCHSCREEN_THC_SPI	3
		option TOUCHSCREEN_THC_I2C	4
	end
	field TOUCHPAD 11 12
		option TOUCHPAD_NONE		0
		option TOUCHPAD_THC_I2C		1
		option TOUCHPAD_LPSS_I2C	2
	end
	field SD 13 14
		option SD_NONE			0
		option SD_GENSYS		1
		option SD_BAYHUB		2
	end
	field STORAGE 15 16
		option STORAGE_UNKNOWN		0
		option STORAGE_NVME_GEN4	1
		option STORAGE_NVME_GEN5	2
		option STORAGE_UFS		3
	end
	field FP 17
		option FP_ABSENT		0
		option FP_PRESENT		1
	end
	field DISPLAY 18
		option DISPLAY_ABSENT		0
		option DISPLAY_PRESENT		1
	end
	field KB 19
		option KB_ABSENT		0
		option KB_PRESENT		1
	end
	field UFC 20 21
		option UFC_ABSENT		0
		option UFC_MIPI			1
		option UFC_USB			2
	end
	field WFC 22 23
		option WFC_ABSENT		0
		option WFC_MIPI			1
		option WFC_USB			2
	end
	field ISH 24
		option ISH_DISABLE		0
		option ISH_ENABLE		1
	end
end

chip soc/intel/pantherlake

	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C0
	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C1
	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C2
	register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB2_C3
	register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port A0
	register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-A Port A1 / WWAN with rework
	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Discrete Bluetooth

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2 x1 Type-A Con #1
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2 x1 Type-A Con #2 / M.2 WWAN with rework

	register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
	register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
	register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
	register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC_SKIP)"

	register "tcss_cap_policy[0]" = "TCSS_TYPE_C_PORT_FULL_FUN"
	register "tcss_cap_policy[1]" = "TCSS_TYPE_C_PORT_FULL_FUN"
	register "tcss_cap_policy[2]" = "TCSS_TYPE_C_PORT_FULL_FUN"
	register "tcss_cap_policy[3]" = "TCSS_TYPE_C_PORT_FULL_FUN"

	# Enable EDP in PortA
	register "ddi_port_A_config" = "1"
	register "ddi_ports_config" = "{
                [DDI_PORT_A] = DDI_ENABLE_HPD,
        }"

	register "serial_io_i2c_mode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
	}"

	register "serial_io_gspi_mode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoPci,
		[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI0A] = PchSerialIoDisabled,
	}"

	# Intel Common SoC Config
	#+-------------------+---------------------------+
	#| Field             |  Value                    |
	#+-------------------+---------------------------+
	#| I2C1              | Camera(CRD1)              |
	#| I2C2              | Camera(CRD2)              |
	#| I2C3              | Audio, TPM(cr50)          |
	#| I2C4              | Touchscreen               |
	#| I2C5              | Touchpad                  |
	#+-------------------+---------------------------+
	register "common_soc_config" = "{
		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
		.i2c[1] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[2] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[3] = {
			.early_init = 1,
			.speed = I2C_SPEED_FAST,
		},
		.i2c[4] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[5] = {
			.speed = I2C_SPEED_FAST,
		},
	}"

	device domain 0 on
		device ref igpu on
			probe DISPLAY DISPLAY_PRESENT
			chip drivers/gfx/generic
				register "device_count" = "5"
				# DDIA for eDP
				register "device[0].name" = ""LCD0""
				register "device[0].type" = "panel"
				# DDIB for HDMI
				# If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB
				register "device[1].name" = ""DD01""
				# TCP0 (DP-1) for port C0
				register "device[2].name" = ""DD02""
				register "device[2].use_pld" = "true"
				register "device[2].pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
				# TCP1 (DP-2) for port C1
				register "device[3].name" = ""DD03""
				register "device[3].use_pld" = "true"
				register "device[3].pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
				# TCP2 (DP-3) for port C2
				register "device[4].name" = ""DD04""
				register "device[4].use_pld" = "true"
				register "device[4].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
				device generic 0 on end
			end
		end

		device ref dtt on
			chip drivers/intel/dptf
				## sensor information
				register "options.tsr[0].desc" = ""DDR_SOC""
				register "options.tsr[1].desc" = ""Ambient""
				register "options.tsr[2].desc" = ""Charger""
				register "options.tsr[3].desc" = ""wwan""

				## Active Policy
				# FIXME: below values are initial reference values only
				register "policies.active" = "{
						[0] = {
							.target = DPTF_TEMP_SENSOR_0,
							.thresholds = {
									TEMP_PCT(70, 97),
									TEMP_PCT(65, 90),
									TEMP_PCT(60, 80),
									TEMP_PCT(55, 75),
									TEMP_PCT(50, 65),
									TEMP_PCT(45, 45),
									TEMP_PCT(43, 30),
								}
							},
						[1] = {
							.target = DPTF_TEMP_SENSOR_1,
							.thresholds = {
									TEMP_PCT(70, 97),
									TEMP_PCT(65, 90),
									TEMP_PCT(60, 80),
									TEMP_PCT(55, 75),
									TEMP_PCT(50, 65),
									TEMP_PCT(45, 45),
									TEMP_PCT(43, 30),
								}
							},
						[2] = {
							.target = DPTF_TEMP_SENSOR_2,
							.thresholds = {
									TEMP_PCT(75, 90),
									TEMP_PCT(70, 80),
									TEMP_PCT(65, 70),
									TEMP_PCT(60, 50),
								}
							},
						[3] = {
							.target = DPTF_TEMP_SENSOR_3,
							.thresholds = {
									TEMP_PCT(75, 90),
									TEMP_PCT(70, 80),
									TEMP_PCT(65, 70),
									TEMP_PCT(60, 60),
									TEMP_PCT(55, 50),
									TEMP_PCT(50, 40),
									TEMP_PCT(45, 30),
								}
							}
				}"

				## Passive Policy
				# TODO: below values are initial reference values only
				register "policies.passive" = "{
						[0] = DPTF_PASSIVE(CPU,         CPU,           95, 5000),
						[1] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_0, 80, 5000),
						[2] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_1, 80, 5000),
						[3] = DPTF_PASSIVE(CHARGER,     TEMP_SENSOR_2, 75, 5000),
						[4] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_3, 80, 5000),
				}"

				## Critical Policy
				# TODO: below values are initial reference values only
				register "policies.critical" = "{
						[0] = DPTF_CRITICAL(CPU,          105, SHUTDOWN),
						[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
						[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
						[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
						[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 85, SHUTDOWN),
				}"

				## Power Limits Control
				register "controls.power_limits" = "{
						.pl1 = {
							.min_power = 25000,
							.max_power = 25000,
							.time_window_min = 28 * MSECS_PER_SEC,
							.time_window_max = 32 * MSECS_PER_SEC,
							.granularity = 200,
						},
						.pl2 = {
							.min_power = 95000,
							.max_power = 95000,
							.time_window_min = 28 * MSECS_PER_SEC,
							.time_window_max = 32 * MSECS_PER_SEC,
							.granularity = 1000,
						}
				}"

				## Charger Performance Control (Control, mA)
				register "controls.charger_perf" = "{
						[0] = { 255, 3000 },
						[1] = {  24, 1500 },
						[2] = {  16, 1000 },
						[3] = {   8,  500 }
				}"

				## Fan Performance Control (Percent, Speed, Noise, Power)
				register "controls.fan_perf" = "{
						[0] = {  90, 6700, 220, 2200, },
						[1] = {  80, 5800, 180, 1800, },
						[2] = {  70, 5000, 145, 1450, },
						[3] = {  60, 4900, 115, 1150, },
						[4] = {  50, 3838,  90,  900, },
						[5] = {  40, 2904,  55,  550, },
						[6] = {  30, 2337,  30,  300, },
						[7] = {  20, 1608,  15,  150, },
						[8] = {  10,  800,  10,  100, },
						[9] = {   0,    0,   0,   50, }
				}"

				## Fan options
				register "options.fan.fine_grained_control" = "true"
				register "options.fan.step_size" = "2"

				device generic 0 alias dptf_policy on end
			end
		end

		device ref ipu on
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "0x50000"
				register "acpi_name" = ""IPU0""
				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
				register "cio2_num_ports" = "2"
				register "cio2_lanes_used" = "{4,2}" # 4 and 2 CSI Camera lanes are used
				register "cio2_lane_endpoint[0]" = ""^I2C1.CAM0""
				register "cio2_lane_endpoint[1]" = ""^I2C2.CAM1""
				register "cio2_prt[0]" = "0"
				register "cio2_prt[1]" = "2"
				device generic 0 on
					probe UFC UFC_MIPI
					probe WFC WFC_MIPI
				end
			end
		end

		device ref iaa off end

		device ref thc0 on
			register "thc_wake_on_touch[0]" = "true"
			probe TOUCHSCREEN TOUCHSCREEN_THC_SPI
			probe TOUCHSCREEN TOUCHSCREEN_THC_I2C
			# THC0 is function 0; hence it needs to be enabled when THC1 is to be enabled.
			probe TOUCHPAD TOUCHPAD_THC_I2C
			chip drivers/intel/touch
				register "name" = "INTEL_THC0_NAME"
				register "mode" = "THC_HID_I2C_MODE"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F08)"
				register "enable_delay_ms" = "2"
				register "enable_off_delay_ms" = "2"
				register "wake_on_touch" = "true"
				# NOTE: Use GpioInt() in _CRS and does not use GPE.
				register "wake_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_VGPIO3_THC0)"
				register "active_ltr" = "1"
				register "idle_ltr" = "0"
				register "connected_device" = "TH_SENSOR_ELAN"
				register "add_acpi_dma_property" = "true"
				device generic 0 alias touch_0_i2c_elan on
					probe TOUCHSCREEN TOUCHSCREEN_THC_I2C
				end
			end
			chip drivers/intel/touch
				register "name" = "INTEL_THC0_NAME"
				register "mode" = "THC_HID_SPI_MODE"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F08)"
				register "enable_delay_ms" = "2"
				register "enable_off_delay_ms" = "2"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)"
				register "reset_delay_ms" = "10"
				register "reset_off_delay_ms" = "2"
				register "wake_on_touch" = "true"
				# NOTE: Use GpioInt() in _CRS and does not use GPE.
				register "wake_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_VGPIO3_THC0)"
				register "active_ltr" = "1"
				register "idle_ltr" = "0"
				register "connected_device" = "TH_SENSOR_ELAN"
				register "soc_hidspi.write_mode" = "HIDSPI_WRITE_MODE_MULTI_SINGLE_SPI"
				register "soc_hidspi.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)"
				register "add_acpi_dma_property" = "true"
				device generic 0 alias touch_0_spi_elan on
					probe TOUCHSCREEN TOUCHSCREEN_THC_SPI
				end
			end
		end
		device ref thc1 on
			register "thc_wake_on_touch[1]" = "true"
			probe TOUCHPAD TOUCHPAD_THC_I2C
			chip drivers/intel/touch
				register "name" = "INTEL_THC1_NAME"
				register "mode" = "THC_HID_I2C_MODE"
				register "wake_on_touch" = "true"
				# NOTE: Use GpioInt() in _CRS and does not use GPE.
				register "wake_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_VGPIO3_THC1)"
				register "active_ltr" = "1"
				register "idle_ltr" = "0"
				register "connected_device" = "TH_SENSOR_HYNITRON"
				register "add_acpi_dma_property" = "true"
				device generic 0 alias touch_1_i2c_hynitron on end
			end
		end

		device ref tbt_pcie_rp0 on end
		device ref tbt_pcie_rp1 on end
		device ref tbt_pcie_rp2 on end
		device ref tbt_pcie_rp3 on end
		device ref tcss_xhci on
			chip drivers/usb/acpi
				device ref tcss_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C0""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(4, 2)"
						device ref tcss_usb3_port0 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(3, 2)"
						device ref tcss_usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C2""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device ref tcss_usb3_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C3""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref tcss_usb3_port3 on end
					end
				end
			end
		end

		device ref tcss_dma0 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port0 as dfp[0].typec_port
				device generic 0 on end
			end
			chip drivers/intel/usb4/retimer
				register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port1 as dfp[1].typec_port
				device generic 0 on end
			end
		end
		device ref tcss_dma1 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port2 as dfp[0].typec_port
				device generic 0 on end
			end
			chip drivers/intel/usb4/retimer
				register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port3 as dfp[1].typec_port
				device generic 0 on end
			end
		end

		device ref ish on
			probe ISH ISH_ENABLE
			probe FP FP_PRESENT
			chip drivers/intel/ish
				register "add_acpi_dma_property" = "true"
				device generic 0 on end
			end
		end

		device ref xhci on
			chip drivers/usb/acpi
				device ref xhci_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C0""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref usb2_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device ref usb2_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C2""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(3, 1)"
						device ref usb2_port3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-C Port C3""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(4, 1)"
						device ref usb2_port4 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(5, 1)"
						device ref usb2_port5 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 2""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(6, 1)"
						device ref usb2_port6 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 3""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(7, 1)"
						device ref usb2_port7 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Bluetooth""
						register "type" = "UPC_TYPE_INTERNAL"
						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A16)"
						device ref usb2_port8 on
							probe WIFI WIFI_PCIE_6
							probe WIFI WIFI_PCIE_7
						end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 1""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 2""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device ref usb3_port2 on end
					end
				end
			end
		end

		device ref ufs on
			probe STORAGE STORAGE_UFS
			probe STORAGE STORAGE_UNKNOWN
		end

		device ref pcie_rp2 on
			probe CELLULAR CELLULAR_PCIE
			register "pcie_rp[PCIE_RP(2)]" = "{
				.clk_src = 5,
				.clk_req = 5,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D03)"
				register "reset_off_delay_ms" = "20"
				register "srcclk_pin" = "5"
				register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL"
				register "skip_on_off_support" = "true"
				register "use_rp_mutex" = "true"
				device generic 0 alias rp2_rtd3 on end
			end
			chip drivers/wwan/fm
				register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A09)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B20)"
				register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D03)"
				register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E02)"
				register "add_acpi_dma_property" = "true"
				use rp2_rtd3 as rtd3dev
				device generic 0 on end
			end
		end # WWAN
		device ref pcie_rp3 on
			probe SD SD_GENSYS
			probe SD SD_BAYHUB
			# Enable PCH PCIE x1 slot using CLK 3
			register "pcie_rp[PCIE_RP(3)]" = "{
				.clk_src = 2,
				.clk_req = 2,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A08)"
				register "enable_delay_ms" = "100"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D19)"
				register "reset_delay_ms" = "20"
				register "srcclk_pin" = "2"
				device generic 0 on end
			end
		end # PCIE x1 slot
		device ref pcie_rp4 on
			probe WIFI WIFI_PCIE_6
			probe WIFI WIFI_PCIE_7
			register "pcie_rp[PCH_RP(4)]" = "{
				.clk_src = 4,
				.clk_req = 4,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
				register "srcclk_pin" = "4"
				device pci 00.0 on end
			end
			chip drivers/wifi/generic
				register "add_acpi_dma_property" = "true"
				register "wake" = "GPE0_DW0_12" # GPP_A12
				use usb2_port7 as bluetooth_companion
				device pci 00.0 on end
			end
		end # discrete WLAN
		device ref pcie_rp5 on
			probe STORAGE STORAGE_NVME_GEN4
			probe STORAGE STORAGE_UNKNOWN
			register "pcie_rp[PCIE_RP(5)]" = "{
			.clk_src = 6,
			.clk_req = 6,
			.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "is_storage" = "true"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B10)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B09)"
				register "srcclk_pin" = "6"
				device generic 0 on end
			end
		end # Gen4 M.2 SSD
		device ref pcie_rp9 on
			probe STORAGE STORAGE_NVME_GEN5
			probe STORAGE STORAGE_UNKNOWN
			register "pcie_rp[PCIE_RP(9)]" = "{
			.clk_src = 1,
			.clk_req = 1,
			.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "is_storage" = "true"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B16)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E03)"
				register "srcclk_pin" = "1"
				device generic 0 on end
			end
		end # Gen5 M.2 SSD
		device ref cnvi_wifi on
			probe WIFI WIFI_CNVI_6
			probe WIFI WIFI_CNVI_7
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				register "add_acpi_dma_property" = "true"
				register "enable_cnvi_ddr_rfim" = "true"
				use cnvi_bluetooth as bluetooth_companion
				device generic 0 on end
			end
		end # CNVi

		device ref cnvi_bluetooth on
			probe WIFI WIFI_CNVI_6
			probe WIFI WIFI_CNVI_7
		end

		# NOTE: i2c0 is function 0; hence it needs to be enabled when any of i2c1-5 is enabled.
		# TPM device is under i2c3. Therefore, i2c0 needs to be enabled anyways.
		device ref i2c0 on end
		device ref i2c1 on
			chip drivers/intel/mipi_camera
				register "acpi_hid" = ""OVTIDB10""
				register "acpi_uid" = "0"
				register "acpi_name" = ""CAM0""
				register "chip_name" = ""Ov 13b10 Camera""
				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"

				register "ssdb.vcm_type" = "0x0C"
				register "vcm_name" = ""VCM1""

				register "ssdb.lanes_used" = "4"
				register "num_freq_entries" = "1"
				register "link_freq[0]" = "560 * MHz" # 560 MHz
				register "remote_name" = ""IPU0""
				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"

				register "has_power_resource" = "true"
				#Controls
				register "clk_panel.clks[0].clknum" = "0" # IMGCLKOUT_0
				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C05" #power_enable
				register "gpio_panel.gpio[1].gpio_num" = "GPP_E10" #reset

				#_ON
				register "on_seq.ops_cnt" = "4"
				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)"
				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)"
				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)"

				#_OFF
				register "off_seq.ops_cnt" = "3"
				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 36 on
					probe WFC WFC_MIPI
				end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "3"
				register "acpi_name" = ""VCM1""
				register "chip_name" = ""DW AF VCM""
				register "device_type" = "INTEL_ACPI_CAMERA_VCM"

				register "vcm_compat" = ""dongwoon,dw9714""

				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"

				register "has_power_resource" = "true"

				#Controls
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C05" #power_enable

				#_ON
				register "on_seq.ops_cnt" = "1"
				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"

				#_OFF
				register "off_seq.ops_cnt" = "1"
				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 0C on
					probe WFC WFC_MIPI
				end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "1"
				register "acpi_name" = ""NVM1""
				register "chip_name" = ""BRCA016GWZ""
				register "device_type" = "INTEL_ACPI_CAMERA_NVM"

				register "nvm_compat" = ""atmel,24c16""

				register "nvm_size" = "0x800"
				register "nvm_pagesize" = "0x01"
				register "nvm_readonly" = "0x01"
				register "nvm_width" = "0x08"

				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"

				register "has_power_resource" = "true"

				#Controls
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C05" #power_enable

				#_ON
				register "on_seq.ops_cnt" = "1"
				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"

				#_OFF
				register "off_seq.ops_cnt" = "1"
				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 50 on
					probe WFC WFC_MIPI
				end
			end
		end # I2C1
		device ref i2c2 on
			chip drivers/intel/mipi_camera
				register "acpi_hid" = ""OVTIDB10""
				register "acpi_uid" = "0"
				register "acpi_name" = ""CAM1""
				register "chip_name" = ""Ov 13b10 Camera""
				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"

				register "ssdb.vcm_type" = "0x0C"
				register "vcm_name" = ""VCM1""

				register "ssdb.lanes_used" = "2"
				register "num_freq_entries" = "1"
				register "link_freq[0]" = "560 * MHz" # 560 MHz
				register "remote_name" = ""IPU0""
				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"

				register "has_power_resource" = "true"
				#Controls
				register "clk_panel.clks[0].clknum" = "1" # IMGCLKOUT_1
				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable
				register "gpio_panel.gpio[1].gpio_num" = "GPP_E01" #reset

				#_ON
				register "on_seq.ops_cnt" = "4"
				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)"
				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)"
				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)"

				#_OFF
				register "off_seq.ops_cnt" = "3"
				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 36 on
					probe UFC UFC_MIPI
				end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "3"
				register "acpi_name" = ""VCM1""
				register "chip_name" = ""DW AF VCM""
				register "device_type" = "INTEL_ACPI_CAMERA_VCM"

				register "vcm_compat" = ""dongwoon,dw9714""

				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"

				register "has_power_resource" = "true"

				#Controls
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable

				#_ON
				register "on_seq.ops_cnt" = "1"
				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"

				#_OFF
				register "off_seq.ops_cnt" = "1"
				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 0C on
					probe UFC UFC_MIPI
				end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "1"
				register "acpi_name" = ""NVM1""
				register "chip_name" = ""BRCA016GWZ""
				register "device_type" = "INTEL_ACPI_CAMERA_NVM"

				register "nvm_compat" = ""atmel,24c16""

				register "nvm_size" = "0x800"
				register "nvm_pagesize" = "0x01"
				register "nvm_readonly" = "0x01"
				register "nvm_width" = "0x08"

				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"

				register "has_power_resource" = "true"

				#Controls
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable

				#_ON
				register "on_seq.ops_cnt" = "1"
				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"

				#_OFF
				register "off_seq.ops_cnt" = "1"
				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 50 on
					probe UFC UFC_MIPI
				end
			end
		end # I2C2
		device ref i2c3 on
			chip drivers/i2c/generic
				register "hid" = ""RTL5682""
				register "name" = ""RT58""
				register "desc" = ""Headset Codec""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F17)"
				# Set the jd_src to RT5668_JD1 for jack detection
				register "property_count" = "1"
				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
				register "property_list[0].name" = ""realtek,jd-src""
				register "property_list[0].integer" = "1"
				device i2c 1a on
					probe AUDIO AUDIO_MAX98360_ALC5682I_I2S
				end
			end
			chip drivers/i2c/tpm
				register "hid" = ""GOOG0005""
				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D15_IRQ)"
				device i2c 50 on end
			end
		end # I2C3
		device ref i2c4 on
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN9048""
				register "generic.desc" = ""ELAN Touchscreen""
				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E18_IRQ)"
				# NOTE: pmc_gpe0_dw2 is GPP_E in baseboard devicetree.cb.
				register "generic.wake" = "GPE0_DW2_18"
				register "generic.probed" = "1"
				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)"
				register "generic.reset_delay_ms" = "20"
				register "generic.reset_off_delay_ms" = "2"
				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F08)"
				register "generic.enable_delay_ms" = "1"
				register "generic.has_power_resource" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 16 on
					probe TOUCHSCREEN TOUCHSCREEN_LPSS_I2C
				end
			end
		end # I2C4
		device ref i2c5 on
			chip drivers/i2c/hid
				register "generic.hid" = ""HFW68H""
				register "generic.desc" = ""Hynitron TOUCHPAD""
				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F18_IRQ)"
				# NOTE: pmc_gpe0_dw0 will be overridden to GPP_F in variant.c.
				register "generic.wake" = "GPE0_DW0_18"
				register "generic.uid" = "5"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x20"
				device i2c 2c on
					probe TOUCHPAD TOUCHPAD_LPSS_I2C
				end
			end
		end # I2C5

		device ref gspi0 on
			chip drivers/spi/acpi
				register "name" = ""CRFP""
				register "hid" = "ACPI_DT_NAMESPACE_HID"
				register "uid" = "1"
				register "compat_string" = ""google,cros-ec-spi""
				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_D01_IRQ)"
				register "wake" = "GPE0_DW1_01"
				register "has_power_resource" = "true"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C15)"
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E19)"
				register "enable_delay_ms" = "3"
				device spi 0 on
					probe FP FP_PRESENT
				end
			end # FPMCU
		end

		device ref smbus on end
		device ref npk on end
		device ref hda on
			chip drivers/intel/soundwire
				device generic 0 on
					chip drivers/soundwire/alc711
						register "desc" = ""Headset Codec""
						register "alc711_address.version" = "SOUNDWIRE_VERSION_1_2"
						register "alc711_address.class" = "MIPI_CLASS_SDCA"
						register "alc711_address.part_id" = "MIPI_DEV_ID_REALTEK_ALC722"
						# SoundWire Link 1 ID 1
						device generic 1.1 on
							probe AUDIO AUDIO_ALC722_SNDW
						end
					end
					chip drivers/soundwire/alc711
						register "desc" = ""Headset Codec""
						register "alc711_address.version" = "SOUNDWIRE_VERSION_1_2"
						register "alc711_address.class" = "MIPI_CLASS_SDCA"
						register "alc711_address.part_id" = "MIPI_DEV_ID_REALTEK_ALC721"
						# SoundWire Link 3 ID 1
						device generic 3.1 on
							probe AUDIO AUDIO_ALC721_SNDW
						end
					end
				end
			end
			chip drivers/generic/max98357a
				register "hid" = ""MX98360A""
				register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E19)"
				register "sdmode_delay" = "5"
				device generic 0 on
					probe AUDIO AUDIO_MAX98360_ALC5682I_I2S
				end
			end
		end
		device ref soc_espi on
			chip ec/google/chromeec
				device pnp 0c09.0 on end
			end
		end
	end
end