chip soc/intel/alderlake
	# FSP configuration

	register "eist_enable" = "true"

	# Sagv Configuration
	register "sagv" = "SaGv_Enabled"
	register "RMT" = "0"
	register "enable_c6dram" = "1"

	register "pmc_gpe0_dw0" = "GPP_J"
	register "pmc_gpe0_dw1" = "GPP_VPGIO"
	register "pmc_gpe0_dw2" = "GPD"

	# USB Configuration
	register "usb2_ports[0]" = "USB2_PORT_SHORT(OC2)" # USB-C LAN_USB1
	register "usb2_ports[1]" = "USB2_PORT_SHORT(OC1)" # MSI MYSTIC LIGHT
	register "usb2_ports[2]" = "USB2_PORT_SHORT(OC0)" # USB-A LAN_USB1
	register "usb2_ports[3]" = "USB2_PORT_LONG(OC0)" # JUSB5
	register "usb2_ports[4]" = "USB2_PORT_SHORT(OC3)" # HUB to rear USB 2.0
	register "usb2_ports[5]" = "USB2_PORT_LONG(OC3)" # empty?
	register "usb2_ports[6]" = "USB2_PORT_LONG(OC7)" # JUSB4
	register "usb2_ports[7]" = "USB2_PORT_LONG(OC0)" # JUSB4
	register "usb2_ports[8]" = "USB2_PORT_LONG(OC2)" # JUSB3
	register "usb2_ports[9]" = "USB2_PORT_LONG(OC7)" # JUSB3
	register "usb2_ports[10]" = "USB2_PORT_SHORT(OC0)" # PS2_USB1
	register "usb2_ports[11]" = "USB2_PORT_SHORT(OC0)" # PS2_USB1
	register "usb2_ports[12]" = "USB2_PORT_SHORT(OC0)" # HUB to USB 2.0 headers
	register "usb2_ports[13]" = "USB2_PORT_SHORT(OC6)" # CNVi BT
	register "usb2_ports[14]" = "USB2_PORT_EMPTY" # USB Redirection port 1
	register "usb2_ports[15]" = "USB2_PORT_EMPTY" # USB Redirection port 2

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # USB-C LAN_USB1
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB-A LAN_USB1
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # JUSB5
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # USB-A USB2
	register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC7)" # USB-A USB2
	register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC7)" # JUSB4
	register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC2)" # JUSB4
	register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # JUSB3
	register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC0)" # JUSB3
	register "usb3_ports[9]" = "USB3_PORT_EMPTY"

	# LPC generic I/O ranges
	register "gen1_dec" = "0x00fc0201"
	register "gen2_dec" = "0x003c0a01"
	register "gen3_dec" = "0x000c03f1"
	register "gen4_dec" = "0x000c0081"

	register "sata_salp_support" = "1"

	register "sata_ports_enable" = "{
		[0] = 1,
		[1] = 1,
		[2] = 1,
		[3] = 1,
		[4] = 1,
		[5] = 1,
		[6] = 1,
		[7] = 1,
	}"

	register "sata_ports_dev_slp" = "{
		[0] = 0,
		[1] = 0,
		[2] = 0,
		[3] = 0,
		[4] = 0,
		[5] = 0,
		[6] = 1,
		[7] = 1,
	}"

	# HDMI on port B
	register "ddi_portB_config" = "1"
	register "ddi_ports_config" = "{
		[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
		[DDI_PORT_C] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
		[DDI_PORT_1] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
		[DDI_PORT_2] = DDI_ENABLE_HPD,
		[DDI_PORT_3] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
		[DDI_PORT_4] = DDI_ENABLE_HPD,
	}"

	register "hybrid_storage_mode" = "true"
	register "dmi_power_optimize_disable" = "true"

	# FIVR configuration
	register "fivr_rfi_frequency" = "1394"
	register "fivr_spread_spectrum" = "FIVR_SS_1_5"
	register "ext_fivr_settings" = "{
		.configure_ext_fivr = 1,
	}"

	device domain 0 on
		subsystemid 0x1462 0x7d25 inherit
		device ref pcie5_0 on
			register "cpu_pcie_rp[CPU_RP(2)]" = "{
				.clk_src = 0,
				.clk_req = 0,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypePciExpressGen5x16" "SlotLengthLong"
					 "PCI_E1" "SlotDataBusWidth16X"
		end
		device ref pcie5_1 off end
		device ref igpu on end
		device ref pcie4_0 on
			register "cpu_pcie_rp[CPU_RP(1)]" = "{
				.clk_src = 9,
				.clk_req = 9,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther"
					 "M2_1" "SlotDataBusWidth4X"
		end
		device ref crashlog off end
		device ref xhci on end
		device ref cnvi_wifi on
			# Enable CNVi BT
			register "cnvi_bt_core" = "true"
			register "cnvi_bt_audio_offload" = "false"
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				register "enable_cnvi_ddr_rfim" = "true"
				device generic 0 on end
			end
		end
		device ref heci1 on end
		device ref heci2 off end
		device ref ide_r off end
		device ref kt off end
		device ref heci3 off end
		device ref heci4 off end
		device ref sata on end
		device ref pcie_rp1 on
			register "pch_pcie_rp[PCH_RP(1)]" = "{
				.clk_src = 10,
				.clk_req = 10,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypePciExpressGen3X1" "SlotLengthShort"
					 "PCI_E2" "SlotDataBusWidth1X"
		end
		device ref pcie_rp2 on
			register "pch_pcie_rp[PCH_RP(2)]" = "{
				.clk_src = 17,
				.clk_req = 17,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong"
					 "PCI_E4" "SlotDataBusWidth1X"
		end
		device ref pcie_rp3 on
			# i225 Ethernet, Clock PM unsupported, onboard device
			register "pch_pcie_rp[PCH_RP(3)]" = "{
				.clk_src = 12,
				.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_BUILT_IN,
			}"
		end
		device ref pcie_rp4 off end

		device ref pcie_rp5 on
			register "pch_pcie_rp[PCH_RP(5)]" = "{
				.clk_src = 15,
				.clk_req = 15,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong"
					 "PCI_E3" "SlotDataBusWidth4X"
		end

		device ref pcie_rp9 on
			register "pch_pcie_rp[PCH_RP(9)]" = "{
				.clk_src = 13,
				.clk_req = 13,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther"
					 "M2_3" "SlotDataBusWidth4X"
		end

		# These are not enabled. The Flex I/O mode is SATA to cover all 8 SATA ports.
		# There is an ASMedia switch on-board to mux the SATA ports 7, 8 and PCIe
		# 9-12, 21-24 to M2_3 and M2_4 slots
		device ref pcie_rp13 off end
		device ref pcie_rp14 off end
		device ref pcie_rp15 off end
		device ref pcie_rp16 off end
		device ref pcie_rp17 off end
		device ref pcie_rp18 off end
		device ref pcie_rp19 off end
		device ref pcie_rp20 off end

		device ref pcie_rp21 on
			register "pch_pcie_rp[PCH_RP(21)]" = "{
				.clk_src = 14,
				.clk_req = 14,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther"
					 "M2_4" "SlotDataBusWidth4X"
		end

		device ref pcie_rp25 on
			register "pch_pcie_rp[PCH_RP(25)]" = "{
				.clk_src = 8,
				.clk_req = 8,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther"
					 "M2_2" "SlotDataBusWidth4X"
		end
		device ref pch_espi on
			chip superio/nuvoton/nct6687d
				register "sensors[0]" = "PECI_AGENT0_DOMAIN0"
				register "sensors[1]" = "TD0P_CURRENT_MODE"
				register "sensors[2]" = "THERMISTOR15"
				register "sensors[3]" = "PCH_CHIP"
				register "sensors[4]" = "THERMISTOR16"
				register "sensors[5]" = "THERMISTOR0"
				register "sensors[6]" = "THERMISTOR1"
				register "sensors[16]" = "VIN0"
				register "sensors[17]" = "VIN1"
				register "sensors[18]" = "VIN2"
				register "sensors[19]" = "VIN3"
				register "sensors[20]" = "VIN4"
				register "sensors[21]" = "VIN5"
				register "sensors[22]" = "VIN6"
				register "sensors[23]" = "VIN7"
				register "sensors[24]" = "VCC"

				register "smbus_sensor.sensor_idx" = "3"
				register "smbus_sensor.sensor_en" = "true"
				register "smbus_sensor.sensor_cmd" = "0x40"
				register "smbus_sensor.sensor_addr" = "0x96"
				register "smbus_sensor.baud_rate" = "BAUD_100K"
				register "smbus_sensor.report_one_byte" = "true"
				register "smbus_sensor.port_sel" = "1"

				register "peci_speed" = "PECI_1200KHZ"

				register "fan_default_val" = "60"

				register "smart_tracking.speed_boundary_low" = "1500"
				register "smart_tracking.speed_boundary_high" = "2500"
				register "smart_tracking.rpm_tolerance_low" = "100"
				register "smart_tracking.rpm_tolerance_mid" = "100"
				register "smart_tracking.rpm_tolerance_high" = "100"
				register "smart_tracking.step_up" = "1"
				register "smart_tracking.step_down" = "1"

				# CPU_FAN
				register "FAN1.mode" = "FAN_SMART_FAN_IV"
				register "FAN1.unit_sel" = "FAN_PWM"
				register "FAN1.fanin_sel" = "TACH_PWM1"
				register "FAN1.fanout_sel" = "TACH_PWM0"
				register "FAN1.fan_alg_weight" = "10"
				register "FAN1.smart_tracking_en" = "true"
				register "FAN1.crit_temp" = "101"
				register "FAN1.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN1.smart_fan.temp_levels" = "{ 40, 55, 70, 85, 90, 95, 100 }"
				register "FAN1.smart_fan.speed_levels" = "{ 13, 38, 63, 85, 90, 95, 100 }"
				register "FAN1.smart_fan.cut_off_delay" = "5"
				register "FAN1.smart_fan.step_up_time" = "1"
				register "FAN1.smart_fan.step_down_time" = "1"

				# PUMP_FAN
				register "FAN2.mode" = "FAN_SMART_FAN_IV"
				register "FAN2.unit_sel" = "FAN_PWM"
				register "FAN2.fanin_sel" = "TACH_PWM3"
				register "FAN2.fanout_sel" = "TACH_PWM2"
				register "FAN2.fan_alg_weight" = "10"
				register "FAN2.smart_tracking_en" = "true"
				register "FAN2.crit_temp" = "101"
				register "FAN2.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN2.smart_fan.temp_levels" = "{ 32, 32, 32, 32, 32, 32, 32 }"
				register "FAN2.smart_fan.speed_levels" = "{ 100, 100, 100, 100, 100, 100, 100 }"
				register "FAN2.smart_fan.cut_off_delay" = "5"
				register "FAN2.smart_fan.step_up_time" = "1"
				register "FAN2.smart_fan.step_down_time" = "1"

				# SYS_FAN1
				register "FAN3.mode" = "FAN_SMART_FAN_IV"
				register "FAN3.unit_sel" = "FAN_PWM"
				register "FAN3.fanin_sel" = "TACH_PWM11"
				register "FAN3.fanout_sel" = "TACH_PWM10"
				register "FAN3.fan_alg_weight" = "10"
				register "FAN3.smart_tracking_en" = "true"
				register "FAN3.crit_temp" = "101"
				register "FAN3.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN3.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN3.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN3.smart_fan.cut_off_delay" = "5"
				register "FAN3.smart_fan.step_up_time" = "1"
				register "FAN3.smart_fan.step_down_time" = "1"

				# SYS_FAN2
				register "FAN4.mode" = "FAN_SMART_FAN_IV"
				register "FAN4.unit_sel" = "FAN_PWM"
				register "FAN4.fanin_sel" = "TACH_PWM13"
				register "FAN4.fanout_sel" = "TACH_PWM12"
				register "FAN4.fan_alg_weight" = "10"
				register "FAN4.smart_tracking_en" = "true"
				register "FAN4.crit_temp" = "101"
				register "FAN4.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN4.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN4.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN4.smart_fan.cut_off_delay" = "5"
				register "FAN4.smart_fan.step_up_time" = "1"
				register "FAN4.smart_fan.step_down_time" = "1"

				# SYS_FAN3
				register "FAN5.mode" = "FAN_SMART_FAN_IV"
				register "FAN5.unit_sel" = "FAN_PWM"
				register "FAN5.fanin_sel" = "TACH_PWM15"
				register "FAN5.fanout_sel" = "TACH_PWM14"
				register "FAN5.fan_alg_weight" = "10"
				register "FAN5.smart_tracking_en" = "true"
				register "FAN5.crit_temp" = "101"
				register "FAN5.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN5.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN5.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN5.smart_fan.cut_off_delay" = "5"
				register "FAN5.smart_fan.step_up_time" = "1"
				register "FAN5.smart_fan.step_down_time" = "1"

				# SYS_FAN4
				register "FAN6.mode" = "FAN_SMART_FAN_IV"
				register "FAN6.unit_sel" = "FAN_PWM"
				register "FAN6.fanin_sel" = "TACH_PWM17"
				register "FAN6.fanout_sel" = "TACH_PWM16"
				register "FAN6.fan_alg_weight" = "10"
				register "FAN6.smart_tracking_en" = "true"
				register "FAN6.crit_temp" = "101"
				register "FAN6.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN6.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN6.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN6.smart_fan.cut_off_delay" = "5"
				register "FAN6.smart_fan.step_up_time" = "1"
				register "FAN6.smart_fan.step_down_time" = "1"

				# SYS_FAN5
				register "FAN7.mode" = "FAN_SMART_FAN_IV"
				register "FAN7.unit_sel" = "FAN_PWM"
				register "FAN7.fanin_sel" = "TACH_PWM19"
				register "FAN7.fanout_sel" = "TACH_PWM18"
				register "FAN7.fan_alg_weight" = "10"
				register "FAN7.smart_tracking_en" = "true"
				register "FAN7.crit_temp" = "101"
				register "FAN7.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN7.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN7.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN7.smart_fan.cut_off_delay" = "5"
				register "FAN7.smart_fan.step_up_time" = "1"
				register "FAN7.smart_fan.step_down_time" = "1"

				# SYS_FAN6
				register "FAN8.mode" = "FAN_SMART_FAN_IV"
				register "FAN8.unit_sel" = "FAN_PWM"
				register "FAN8.fanin_sel" = "TACH_PWM6"
				register "FAN8.fanout_sel" = "TACH_PWM4"
				register "FAN8.fan_alg_weight" = "10"
				register "FAN8.smart_tracking_en" = "true"
				register "FAN8.crit_temp" = "101"
				register "FAN8.smart_fan.temp_src" = "{ 1, 0, 0, 0 }"
				register "FAN8.smart_fan.temp_levels" = "{ 10, 20, 30, 40, 50, 60, 70 }"
				register "FAN8.smart_fan.speed_levels" = "{ 60, 60, 60, 60, 60, 60, 60 }"
				register "FAN8.smart_fan.cut_off_delay" = "5"
				register "FAN8.smart_fan.step_up_time" = "1"
				register "FAN8.smart_fan.step_down_time" = "1"

				device pnp 4e.1 off end		# Parallel port
				device pnp 4e.2 on		# COM1
					io 0x60 = 0x3f8
					irq 0x70 = 4
				end
				device pnp 4e.3 off end		# COM2, IR
				device pnp 4e.5 on		# Keyboard
					io 0x60 = 0x60
					io 0x62 = 0x64
					irq 0x70 = 1
					irq 0x72 = 12
				end
				device pnp 4e.6 off end		# CIR
				device pnp 4e.7 off end		# GPIO0-7
				device pnp 4e.8 off end		# P80 UART
				device pnp 4e.9 off end		# GPIO8-9, GPIO1-8 AF
				device pnp 4e.a on		# ACPI
					# Vendor firmware did not assign I/O and IRQ
				end
				device pnp 4e.b on		# EC
					io 0x60 = 0xa20
					# Vendor firmware did not assign IRQ
				end
				device pnp 4e.c off end		# RTC
				device pnp 4e.d off end		# Deep Sleep
				device pnp 4e.e off end		# TACH/PWM assignment
				device pnp 4e.f off end		# Function register
			end
			chip drivers/pc80/tpm
				device pnp 0.0 on end	# TPM
			end
		end
		device ref p2sb on end
		device ref hda on
			subsystemid 0x1462 0x9d25
			register "pch_hda_audio_link_hda_enable" = "1"
			register "pch_hda_dsp_enable" = "0"
			register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
			register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
			register "pch_hda_idisp_codec_enable" = "true"
		end
		device ref smbus on end

		chip drivers/crb
			device mmio 0xfed40000 on end
		end
	end
end