{
 "testbed": [{
        "name": "<your testbed name>",
        "AndroidDevice": ["<your device serial number>"],
        "bug_report": 1,
	"RetailAccessPoints": ["<your ap configuration. see class definition in wifi_retail_ap.py>"],
        "Attenuator": ["<your attenuator configuration. see attenuator class definition>"],
        "main_network": {
            "<your network name>": {
                "SSID": "<your SSID>",
                "password": "<your key>",
                "BSSID": "<your BSSID>"
            },
            "<your other network names>": {
                "SSID": "<your SSID>",
                "password": "<your key>",
                "BSSID": "<your BSSID>"
            }
        },
        "IPerfServer": ["<your iperf server configuation. see class definition in iperf_server>"],
	"testbed_params": {
			 "default_region": "<default access point region to run tests in. This will be used for all non DFS channels>",
			 "DFS_region": "<access point region to run DFS tests in>",
                         "iperf_server_address": "<ip address of iperf server generating or accepting test traffic>",
                         "fixed_attenuation": {"<your channel number 1>": "<your testbed attenuation on this channel>", "<your channel number 2>": "<your testbed attenuation on this channel>"},
                 	 "dut_front_end_loss": {"<your channel number 1>": "<your DUT front end loss on this channel>", "<your channel number 2>": "<your DUT front end loss on this channel>"},
			 "ap_tx_power": {"<your channel number 1>": "<your access point transmit power on this channel>", "<your channel number 2>": "<your access point transmit power on this channel>"},
			 "golden_results_path": "<your full path to golden results used for pass fail check>"
	}
    }
    ],
    "rvr_test_params":{
                         "country_code": "<device country code to set during rvr tests>",
			 "iperf_duration": 30,
			 "iperf_ignored_interval": 2,
			 "UDP_rates": {"VHT20": "<throughput to transmit in this mode>", "VHT40": "<throughput to transmit in this mode>", "VHT80": "<throughput to transmit in this mode>"},
                         "rvr_atten_start": 20,
                         "rvr_atten_stop": 30,
                         "rvr_atten_step": 5,
			 "pct_tolerance": 5,
			 "abs_tolerance": 5,
			 "failure_count_tolerance": 1
    },
    "rssi_test_params":{
			 "country_code": "<device country code to set during rvr tests>",
                         "rssi_vs_atten_start": 20,
                         "rssi_vs_atten_stop": 80,
                         "rssi_vs_atten_step": 1,
			 "rssi_vs_atten_connected_measurements": 10,
			 "rssi_vs_atten_scan_measurements": 0,
			 "rssi_vs_atten_metrics": ["signal_poll_rssi", "scan_rssi", "chain_0_rssi", "chain_1_rssi"],
			 "rssi_stability_atten": [20, 55],
			 "rssi_stability_duration": 10,
			 "rssi_tracking_waveforms": [{"atten_levels": [40, 61, 40], "step_size": 1, "step_duration": 1, "repetitions":1}],
			 "polling_frequency": 0.25,
			 "abs_tolerance": 2.5,
			 "stdev_tolerance": 1
    },
    "throughput_stability_test_params":{
			 "country_code": "<device country code to set during rvr tests>",
                         "iperf_duration": 30,
			 "iperf_ignored_interval": 5,
			 "UDP_rates": {"VHT20": "200M", "VHT40": "400M", "VHT80": "700M"},
			 "low_rssi_backoff_from_range": 10,
			 "min_throughput_threshold": 75,
			 "std_deviation_threshold": 5

    },
    "ping_test_params":{
			 "country_code": "<device country code to set during rvr tests>",
			 "ping_size": 64,
			 "range_ping_duration": 1,
			 "range_ping_interval": 0.002,
			 "range_atten_start": 60,
			 "range_atten_step": 1,
			 "range_atten_stop": 70,
			 "range_ping_loss_threshold": 25,
			 "range_gap_threshold": 2,
			 "rtt_ping_duration": 30,
			 "rtt_ping_interval": {"fast": 0.002, "slow": 0.5},
			 "rtt_ignored_interval": 0.15,
			 "rtt_test_attenuation": [20, 50],
			 "rtt_test_percentile": 5,
			 "rtt_threshold": 0.2,
			 "rtt_std_deviation_threshold": 5
    },
    "logpath": "<path to logs>",
    "testpaths": ["<path to ACTS root folder>/tools/test/connectivity/acts_tests/tests/google/wifi"]
}